A high quality, pressure-sensitive masking tape with good quick stick and holding properties for the composites industries. Product is designed for masking fiberglass molds (gel coating) and other parts requiring clean removal. Works with either semi-permanent or paste wax release agents. Can be exposed to oven temperatures up to 325°F (163°C) for 30 minutes. Times and temperature depends upon surface.

• PHYSICAL PROPERTIES
• The following data are nominal values based on PSTC,
• ASTM and other standard test. The data should not be
• considered as specifications.
• 
  Backing                                               Smooth Crepe Paper
• 
  Color                                                  Orange
• 
  Adhesive                                             Natural Rubber/Resin
• 
  Adhesion to Steel (oz/in of width)        27 (7.4 N/25mm)
• PSTC-1
• 
  Quick Stick to Kraft (oz/in of width)    8 (2.2 N/25mm)
• 
  Tensile Strength (lbs/in of width)          23 (101 N/25mm)
• PSTC-31
• 
  Elongation (% at break)                      14
• PSTC-31
  Total Thickness (mils)                         7.3 (0.185mm)
• PSTC-33
  
  Can be exposed to oven temperatures up
  to 325°F (163°C) for 30 minutes